Pressurized Modules
Pressurized Membrane Modules (also known as UF membranes) are widely applied for desalination pretreatment, reverse osmosis pretreatment, wastewater reclamation and production of potable water.
In addition to making conventional pressurized modules, Primem is in the final stage of developing a completely new pressurized module with a patented design and the following advantages:
1. Improved potting quality and production efficiency due to simplified processes;
2. much extended service life as the membrane filter can be easily dismounted, cleaned, repaired or replaced.
Specifications of Conventional Pressurized Modules
| Fiber OD/ID (mm) | 0.7-1.3 |
| Filtration Mode | Outside-in |
| Effective Area (m²) | 45 – 85 |
| Design Flux (LMH) | 60-200 |
| Pore Size (µm) | 0.02 |
| Dimension (mm) | Ф225×1500-2500mm* |
| Weight (kg) | 50-100 |
| Feed/Permeate Port | DN50 |
| Housing Material | Housing Material UPVC |
* Height of the module can be adjusted from 1500mm to 2500mm according to customers’ requirement.
Schematic Drawing of a New Pressurized Module
